Home > Support > Clear-Com Solution Finder

Clear-Com Solution Center

Search Solutions, Manuals and Datasheets:

Have us contact you:

Highest Ranked Solutions:

	Partyline: AC-10H is noisy	12/29/2009
	There is an RF filter capacitor from pin 1 to the audio plug housing. When the housing was changed to plastic, the cap was not moved to a chassis grou...
	Wireless: Differences between CellCom Wireless Group and Standard Group	5/18/2011
	The CellCom/ FreeSpeak wireless basestation can support point to point, Group and Wireless Partylines communcationWireless Party-line:The CellCom base...
	Partyline: What is a YC-36 "Y" adapter?	8/3/2010
	The YC-36 plugs into a 6-pin male XLR intercom connector and splits out into two 3-pin female XLR connectors, for seperate line connection to channels...
	Wireless: Which hardware / software firewall ports must be open for T-Desk to work properly?	6/10/2011
	The following parameters must be met in order to run T-Desk on a PC connected to a Tempest 900 or Tempest 2400 base station.Windows XP or Vista512 MB ...
	Matrix: use of "Off Hook Tally " on TEL-14 causing Eclipse system instability	12/29/2009
	If customers have an Eclipse system with V4.2 or earlier versions of ECS and experience the following Slow response time from Panel key press to tally...

Most Recent Solutions:

	Partyline: Can the MS-702 PL panel power one channel while the other is shorted?	6/14/2011
	Question:  Can I continue to use the MS-702 party-line mains panel if one channel reads a shorted line?  Is the second PL channel still capable of wor...
	Wireless: Which hardware / software firewall ports must be open for T-Desk to work properly?	6/10/2011
	The following parameters must be met in order to run T-Desk on a PC connected to a Tempest 900 or Tempest 2400 base station.Windows XP or Vista512 MB ...
	Matrix: TEL-14 IFB on Matrix +3 frame hangs up 15 seconds after dialing in	6/10/2011
	Question:  I have a TEL-14 telephone IFB that isn't working correctly.  After the remote talent dials in the interface card picks up the line for ...
	Matrix: Eclipse Panels: How do I access online mode message panel logic inputs?	6/8/2011
	If a panel has logic #1 or logic #2 inputs set then when entering ECS V5.0 on-line mode may you get a key assigned on key number 40000 / 40001.
	Matrix: I want to route audio (indent tone or welcome message) to incoming telephone callers	6/5/2011
	When a caller rings in on a TEL-14 and it auto-answers  rather than listen to silence while waiting for the MCr / studio operator to press a key to ta...